Plate 3 symbols

5A, 6A, 33A, 34A, 35A, 16E, 74CU.

A symbol in italics is not illustrated unless referred to another plate

Symbol Description

5A Foot notes: *

n5A Centring Pin (increased diameter)

q5A * Centring Pin

5A1 Adjusting Nut

b5A1 Adjusting Nut

5A2 * Adjusting Nut Lock Nut

a5A2 Adjusting Nut Lock Nut

a5A3 Spring

e5A4 * Spring Abutment, lower

g5A4 Spring Abutment, lower

a5A5 * Spring Abutment, upper

d5A5 Spring Abutment, upper

5A12 Spring Abutment, lower, Lock Nut

b5A12 Spring Abutment, lower, Lock Nut

Xn5A Centring Pin (increased diameter) group; consists of n5A, b5A1, a5A2 and 3, g5A4, d5A5, b5A12

*Xq5A** Centring Pin consists of q5A, 5A1,and 2, a5A3, e5A4, a5A5, 5A12

* Composition Casters numbered 22001 to 22827 inclusive and Type and Rule Casters numbered 1240 to 1300 inclusive were equipped with these parts

PLEASE NOTE The correct centring pin for use with standard American matrices is covered by the symbol, U.K. Part j5A. The 3/8" diameter d5A pin is now obsolete and centring pin n5A has a cone point suitable only for standard British matrices

TOP

Symbol Description

6A Foot notes: Ý , § , * , ß

d6AA * Centring Pin Stand

a6A3 Ý Stud (2), in Stand

c6A5 ß Bush

d6A5 Bush

a6A6 Bush Adjusing Sleeve

a6A22 Nut, lower

6A34 Locking Lever

6A35 Locking Lever Guard

6A36 Locking Lever Guard Spring (2)

6A37 Locking Lever Guard Spring Cap (2)

6A38 Locking Lever Guard Spring Cap Screw (2), 5/32"x1/4", in Stud

6A39 Stud Nut (2)

6A41 § Stud Pin (2)

a6A41 Stud Taper Pin (2), 3/32"x5/8"

Xd6A ß Centring Pin Stand group; consists of d6AA, d6A5, a6A6, a6A22, 6A34 and 35, 6A36 (2), 6A37 (2), 6A38 (2), 6A39 (2)

* d6AA consists of d6A, a6A3 (2), a6A41 (2)

Ý Can by fitted only at Workshops

ß Composition Casters numbered 22001 to 22827 inclusive and Type and Rule Casters numbered 1240 to 1300 inclusive were equipped with these parts

§ Composition Casters numbered 22001 to those supplied prior to December 1950 and Type and Rule Casters numbered 1240 to those supplied prior to December 1950 were equipped with these parts

TOP

Symbol Description

33A Foot notes: none

33A1 Centring Pin Stand Adjusting Micrometer Screw (2)

33A2 Differential Screw, right

a33A3 Differential Screw Bell Crank

33A4 Differential Screw Bell Crank Plunger

a33A5 Differential Screw Bell Crank Stud

33A6 Differential Screw, left

33A7 Differential Screw Key Screw (2)

33A8 Plunger (2)

33A9 Plunger Spring

Xa33A Centring Pin Stand Adjusting Micrometer Screw group; consists of 33A1 (2), 33A2, a33A3, 33A4, a33A5, 33A6, 33A7 (2), 33A8 (2), 33A9

TOP

Symbol Description

34A Foot notes: Ý , *

34A1A * Matrix Holder, Indian Matrices

34A2 Ý Bush

34A3 Matrix Retaining Screw, long (3)

34A4 Matrix Retaining Screw, medium (2)

34A5 Matrix Retaining Screw, short (2)

34A6 Wrench

X34A Matrix Holder, Indian Matrices, group; consists of 34A1A, 34A3 (3), 34A4 (2), 34A5 (2), 34A6

* 34A1A consists of 34A1 and 2

Ý Can by fitted only at Workshops

TOP

Symbol Description

35A Centring Pin Aligning Lever Foot notes: none

35A2 Plunger, left

35A6 Plunger, right

TOP

Symbol Description

16E Foot notes: # , Ý , ÝÝ, ¶ , § , §§ , * , ** , || , ß

g16EE * Centring Pin Lever, type heights 918" to 942" (see Plate 14)

h16EE Ý Centring Pin Lever, (specify type height), type heights 943" to 1.017"

j16EE Centring Pin Lever, type heights .918" to .942", Type and Rule Caster

k16EE Centring Pin Lever, (specify type height), type heights .943" 1 .017", Type and Rule Caster

16E1 Screw (3), 3/8" x 11/4"(see Plate 14)

16E2 Plate, for Wedge Lever Arm Rods (see Plate 13)

a16E2 Plate, for Wedge lever Arm Rods, Railway Timetable Equipment Attachment (see Plate 51)

16E3 Plate Screw (2), 5/32" x 5/16" (see Plate 13)

16E37 Stop Pin, for Bridge Lever Connecting Link (see Plate 14)

16E4 Stud, for Bridge Lever Connecting Link(see Plate 14)

16E5 Stud Split Pin, 1/16" x 1/2" (see Plate 14)

c16E6 Plate (see Plate 14)

a16E7 Plate Rivet (2)

b16E8 Pin

a16E14 (refer after d16E16E)

a16E15 (refer above b16E17)

b16E16E || Actuating Lever, Low Quad

c16E16E ¶ Actuating Lever, Duplex Mould Attachments

d16E16E Actuating Lever, Triplex Mould Attachment (see Plate 57)

a16E14 Fulcrum Pin

a16E15 Fulcrum Pin Locking Screw

b16E17 Spring

16E18 Adjusting Screw

16E19 Adjusting Screw Nut

16E25 Pin (2), Stop for Cam Lever

a16E20E ÝÝ Selecting Lever**, Low Quad

c16E20 Selecting Lever, Duplex Mould and Dual Type Mould Attachments (see Plate 53)

d16E20 Selecting Lever, Two-Colour Attachment

e16E20 Selecting Lever, Triplex Mould Attachment (see Plate 57)

16E21 §§ Bush

a16E22 Spring

c16E22 Spring, Triplex Mould Attachment (see Plate 57)

a16E23 Fulcrum Bolt

b16E23 Fulcrum Bolt, Duplex Mould, Two-Colour and Dual Type Mould Attachments (see Plate 53)

c16E23 Fulcrum Screw, Triplex Mould Attachment (see Plate 57)

16E24 Fulcrum Bolt Nut

16E25 (refer after 16E19)

16E35 Locating Ball, Duplex Mould, Two-Colour and Dual Type Mould Attachments (see Plate 53)

16E36 Locating Ball Spring, Duplex Mould and Dual Type Mould Attachments (see Plate 53)

a16E36 Locating Ball Spring, Two-Colour Attachment

a16E26 Selecting Lever Cam Lever, Low Quad

a16E26 assd.# Selecting Lever Cam Lever, assembled

16E27 Fulcrum Bolt

16E28 Fulcrum Bolt Nut

a16E29 Operating Arm

16E30 Eccentric

16E31 Locking Screw

16E32 Locking Screw Washer

16E35 (refer above a16E26)

16E36 (refer above a16E26)

a16E36 (refer above a16E26)

16E37 (refer after 16E3)

Xb16E16 Actuating Lever, Low Quad, group; consists of a16E14and 15, b16E16E, b16E17, 16E18 and 19

Xa16E20 Selecting Lever, Low Quad, group; consists of a16E20E, a16E20E, a16E22 and 23, 16E24

Xa16E26 Selecting Lever Cam Lever, Low Quad, group; consists of a16E26 assd., 16E27 and 28

Xg16E Centring Pin Lever, type heights .918" to .942" inclusive, group; consists of g16EE, 16E1(3), 16E2, 16E3 (2), 16E5

Xh16E Centring Pin Lever (specify type height), type heights .943" to 1.017". group; consists of h16EE , 16E1 (3), 16E2, 16E3 (2),16E5

Xj16E

j16EE, 16E1 (3), 16E5
Centring Pin Lever, type heights .918" to .942", Type and Rule Caster, group; consists of

Xk16E Centring Pin Lever (specify type height), type heights .943" to 1.017", Type and Rule Caster, group; consists of k16EE, 16E1 (3), 16E5

* g16EE consists of g16E, 16E4, c16E6, a16E7 (2), b16e8, 16E37

Ý h16EE consists of h16E, 16E4, c16E6, a16E7(2), b16E8, 16E37

ß j16EE consists of j16E, 16E4, 16E37

§ k16EE consists of k16E, 16E4, 16E37

|| b16E16E consists of b16E16, 16E25 (2)

¶ c16E16E consists of c16E16, 16E25 (2)

** d16E16E consists of d16E16, 16E25 (2)

ÝÝ a16E20E consists of a16E20, 16E21

# a16E26 assd. consists of a16E26, a16E29, 16E30, 31 and 32

§§ Can be fitted only at Workshops

TOP

Symbol Description

74CU Foot notes: # , Ý , ÝÝ, ¶ , § , §§ , * , , | , ß

Centring Pin (increased diameter) Attachment** Object-- To enable larger diameter Centring Pin to be used on Composition Casters and Type and Rule Casters For Composition Casters numbered 22001 to 22827 and Type and Rule Casters numbered 1240 to 1300

74CU Centring Pin (increased diameter) Attachment; consists of n5A, b5A1, a5A1, a5A2, g5A4, d5A5, b5A12, d6A5

TOP

*Symbol*	*Description*
34A	Foot notes: Ý , *
34A1A *	Matrix Holder, Indian Matrices
34A2 Ý	Bush
34A3	Matrix Retaining Screw, long (3)
34A4	Matrix Retaining Screw, medium (2)
34A5	Matrix Retaining Screw, short (2)
34A6	Wrench
X34A	Matrix Holder, Indian Matrices, group; consists of 34A1A, 34A3 (3), 34A4 (2), 34A5 (2), 34A6
* 34A1A consists of 34A1 and 2
Ý Can by fitted only at Workshops

*Symbol*	*Description*
74CU	Foot notes: # , Ý , ÝÝ, ¶ , § , §§ , * , ** , \| , ß
Centring Pin (increased diameter) Attachment Object-- To enable larger diameter Centring Pin to be used on Composition Casters and Type and Rule Casters For Composition Casters numbered 22001 to 22827 and Type and Rule Casters numbered 1240 to 1300
74CU	Centring Pin (increased diameter) Attachment; consists of n5A, b5A1, a5A1, a5A2, g5A4, d5A5, b5A12, d6A5

*Symbol*	*Description*
5A	Foot notes: *
n5A	Centring Pin (increased diameter)
q5A *	Centring Pin
5A1	Adjusting Nut
b5A1	Adjusting Nut
5A2 *	Adjusting Nut Lock Nut
a5A2	Adjusting Nut Lock Nut
a5A3	Spring
e5A4 *	Spring Abutment, lower
g5A4	Spring Abutment, lower
a5A5 *	Spring Abutment, upper
d5A5	Spring Abutment, upper
5A12	Spring Abutment, lower, Lock Nut
b5A12	Spring Abutment, lower, Lock Nut
Xn5A	Centring Pin (increased diameter) group; consists of n5A, b5A1, a5A2 and 3, g5A4, d5A5, b5A12
Xq5A*	Centring Pin consists of q5A, 5A1,and 2, a5A3, e5A4, a5A5, 5A12
* Composition Casters numbered 22001 to 22827 inclusive and Type and Rule Casters numbered 1240 to 1300 inclusive were equipped with these parts
PLEASE NOTE The correct centring pin for use with standard American matrices is covered by the symbol, U.K. Part j5A. The 3/8" diameter d5A pin is now obsolete and centring pin n5A has a cone point suitable only for standard British matrices

*Symbol*	*Description*
6A	Foot notes: Ý , § , * , ß
d6AA *	Centring Pin Stand
a6A3 Ý	Stud (2), in Stand
c6A5 ß	Bush
d6A5	Bush
a6A6	Bush Adjusing Sleeve
a6A22	Nut, lower
6A34	Locking Lever
6A35	Locking Lever Guard
6A36	Locking Lever Guard Spring (2)
6A37	Locking Lever Guard Spring Cap (2)
6A38	Locking Lever Guard Spring Cap Screw (2), 5/32"x1/4", in Stud
6A39	Stud Nut (2)
6A41 §	Stud Pin (2)
a6A41	Stud Taper Pin (2), 3/32"x5/8"
Xd6A ß	Centring Pin Stand group; consists of d6AA, d6A5, a6A6, a6A22, 6A34 and 35, 6A36 (2), 6A37 (2), 6A38 (2), 6A39 (2)
* d6AA consists of d6A, a6A3 (2), a6A41 (2)
Ý Can by fitted only at Workshops
ß Composition Casters numbered 22001 to 22827 inclusive and Type and Rule Casters numbered 1240 to 1300 inclusive were equipped with these parts
§ Composition Casters numbered 22001 to those supplied prior to December 1950 and Type and Rule Casters numbered 1240 to those supplied prior to December 1950 were equipped with these parts

*Symbol*	*Description*
33A	Foot notes: none
33A1	Centring Pin Stand Adjusting Micrometer Screw (2)
33A2	Differential Screw, right
a33A3	Differential Screw Bell Crank
33A4	Differential Screw Bell Crank Plunger
a33A5	Differential Screw Bell Crank Stud
33A6	Differential Screw, left
33A7	Differential Screw Key Screw (2)
33A8	Plunger (2)
33A9	Plunger Spring
Xa33A	Centring Pin Stand Adjusting Micrometer Screw group; consists of 33A1 (2), 33A2, a33A3, 33A4, a33A5, 33A6, 33A7 (2), 33A8 (2), 33A9

*Symbol*	*Description*
35A Centring Pin Aligning Lever	Foot notes: none
35A2	Plunger, left
35A6	Plunger, right

*Symbol*	*Description*
16E	Foot notes: # , Ý , ÝÝ, ¶ , § , §§ , * , ** , \|\| , ß
g16EE *	Centring Pin Lever, type heights 918" to 942" (see Plate 14)
h16EE Ý	Centring Pin Lever, (specify type height), type heights 943" to 1.017"
j16EE	Centring Pin Lever, type heights .918" to .942", Type and Rule Caster
k16EE	Centring Pin Lever, (specify type height), type heights .943" 1 .017", Type and Rule Caster
16E1	Screw (3), 3/8" x 11/4"(see Plate 14)
16E2	Plate, for Wedge Lever Arm Rods (see Plate 13)
a16E2	Plate, for Wedge lever Arm Rods, Railway Timetable Equipment Attachment (see Plate 51)
16E3	Plate Screw (2), 5/32" x 5/16" (see Plate 13)
16E37	Stop Pin, for Bridge Lever Connecting Link (see Plate 14)
16E4	Stud, for Bridge Lever Connecting Link(see Plate 14)
16E5	Stud Split Pin, 1/16" x 1/2" (see Plate 14)
c16E6	Plate (see Plate 14)
a16E7	Plate Rivet (2)
b16E8	Pin
a16E14	(refer after d16E16E)
a16E15	(refer above b16E17)
b16E16E \|\|	Actuating Lever, Low Quad
c16E16E ¶	Actuating Lever, Duplex Mould Attachments
d16E16E **	Actuating Lever, Triplex Mould Attachment (see Plate 57)
a16E14	Fulcrum Pin
a16E15	Fulcrum Pin Locking Screw
b16E17	Spring
16E18	Adjusting Screw
16E19	Adjusting Screw Nut
16E25	Pin (2), Stop for Cam Lever
a16E20E ÝÝ	Selecting Lever, Low Quad
c16E20	Selecting Lever, Duplex Mould and Dual Type Mould Attachments (see Plate 53)
d16E20	Selecting Lever, Two-Colour Attachment
e16E20	Selecting Lever, Triplex Mould Attachment (see Plate 57)
16E21 §§	Bush
a16E22	Spring
c16E22	Spring, Triplex Mould Attachment (see Plate 57)
a16E23	Fulcrum Bolt
b16E23	Fulcrum Bolt, Duplex Mould, Two-Colour and Dual Type Mould Attachments (see Plate 53)
c16E23	Fulcrum Screw, Triplex Mould Attachment (see Plate 57)
16E24	Fulcrum Bolt Nut
16E25	(refer after 16E19)
16E35	Locating Ball, Duplex Mould, Two-Colour and Dual Type Mould Attachments (see Plate 53)
16E36	Locating Ball Spring, Duplex Mould and Dual Type Mould Attachments (see Plate 53)
a16E36	Locating Ball Spring, Two-Colour Attachment
a16E26	Selecting Lever Cam Lever, Low Quad
a16E26 assd.#	Selecting Lever Cam Lever, assembled
16E27	Fulcrum Bolt
16E28	Fulcrum Bolt Nut
a16E29	Operating Arm
16E30	Eccentric
16E31	Locking Screw
16E32	Locking Screw Washer
16E35	(refer above a16E26)
16E36	(refer above a16E26)
a16E36	(refer above a16E26)
16E37	(refer after 16E3)
Xb16E16	Actuating Lever, Low Quad, group; consists of a16E14and 15, b16E16E, b16E17, 16E18 and 19
Xa16E20	Selecting Lever, Low Quad, group; consists of a16E20E, a16E20E, a16E22 and 23, 16E24
Xa16E26	Selecting Lever Cam Lever, Low Quad, group; consists of a16E26 assd., 16E27 and 28
Xg16E	Centring Pin Lever, type heights .918" to .942" inclusive, group; consists of g16EE, 16E1(3), 16E2, 16E3 (2), 16E5
Xh16E	Centring Pin Lever (specify type height), type heights .943" to 1.017". group; consists of h16EE , 16E1 (3), 16E2, 16E3 (2),16E5
Xj16E j16EE, 16E1 (3), 16E5	Centring Pin Lever, type heights .918" to .942", Type and Rule Caster, group; consists of
Xk16E	Centring Pin Lever (specify type height), type heights .943" to 1.017", Type and Rule Caster, group; consists of k16EE, 16E1 (3), 16E5
* g16EE consists of g16E, 16E4, c16E6, a16E7 (2), b16e8, 16E37
Ý h16EE consists of h16E, 16E4, c16E6, a16E7(2), b16E8, 16E37
ß j16EE consists of j16E, 16E4, 16E37
§ k16EE consists of k16E, 16E4, 16E37
\|\| b16E16E consists of b16E16, 16E25 (2)
¶ c16E16E consists of c16E16, 16E25 (2)
** d16E16E consists of d16E16, 16E25 (2)
ÝÝ a16E20E consists of a16E20, 16E21
# a16E26 assd. consists of a16E26, a16E29, 16E30, 31 and 32
§§ Can be fitted only at Workshops

Plate 3 symbols

A symbol in italics is not illustrated unless referred to another plate

Symbol Description 35A Centring Pin Aligning Lever Foot notes: none 35A2 Plunger, left 35A6 Plunger, right

Symbol Description

35A Centring Pin Aligning Lever Foot notes: none

35A2 Plunger, left

35A6 Plunger, right